Tips to Reduce Fuel Consumption
A substantial portion of the costs of operating a farm covers tractor
and machinery operation. The recent sharp increase in fuel costs has created
an additional incentive to reduce fuel costs and become more efficient
in the use of agricultural machinery.
Here are 14 tips for reducing fuel consumption and improving the efficiency
of tractors and machinery:
- Reduce tillage operations: Switch to no-till or minimum tillage options.
This can reduce fuel use by 86%.
- Read operator's manuals and follow the maintenance schedules recommended
by the manufacturers.
- If the tractor engine is exhausting black smoke, clean the injectors.
- Use manure more efficiently as a substitute for fertilizers (Figure
1). Information on manure management is available from the Agricultural
Information Contact Centre, 1-877-424-1300, email@example.com.
- Avoid using big tractors to pull small loads. Match the tractor to
the power requirements of the job (Figure 2).
- Replace air and fuel filters regularly, especially when working in
dusty conditions (Figure 3).
Figure 1. Using
manure more efficiently reduces the number of passes through the field
for fertilizer application.
Figure 2. Matching
the tractor size to the implement saves energy and reduces frustration
in the field.
Figure 3. Changing
air filters after dusty activities helps maintain an engine's efficiency.
- Avoid idling the tractor for long periods.
- Operate tractors in higher gears at low throttle settings rather than
lower gears at high throttle settings.
- Check tractor and equipment each day before starting work. Correct
small maintenance problems before they cause a breakdown in the field.
- Use engine oil with the proper viscosity for your engine. Change oil
and oil filters according to the manufacturer's recommendations.
- Use proper tractor ballasting to reduce wheel slip, thus reducing
- Replace worn drive tires, reducing excessive wheel slip and fuel consumption.
- Check tractor and equipment tires to ensure they are at the recommended
inflation pressures for the best traction and the lowest rolling resistance.
- Use radial-ply tires instead of bias-ply tires for better traction
and lower fuel consumption.
Over time, the measures listed above can significantly lower the amount
of fuel used in an agricultural operation, benefiting both farm finances
and the environment.
This Factsheet was reviewed by Jake DeBruyn, P.Eng,New Technology Integration
Engineer, OMAFRA, Guelph.
This Factsheet was developed with sponsorship from Hydro One and in partnership
with the Ontario Power Authority, the Ontario Federation of Agriculture,
the Ministry of Energy and the Ministry of Agriculture, Food and Rural